Woodwork UK

davidpidge

Do you mean when feeding against the fence or free handing while following a line?

davidpidge

I would start by going to a big machinery dealer to see different machines and get an idea of what they can do at what price.

davidpidge

Try BPI auctions or someone similar?

davidpidge

There are panel saws with various lengths of sliding table down to a meter or so. Axminster has plenty or you could get a sedgwick TA315 and get the big sliding table option. What's your budget? Looking for new or used or not fussed? Just re-read your post and if you need a heavy duty rip saw as a p...

davidpidge

Hi,
Anyone got a recommendation for suppliers of wide belts? I need some delivered quickly but can't seem get any recommendations.
Seems strange you have to buy them 10 at a time so you can't test new ones without spending a fortune.

davidpidge

Why not English oak?

davidpidge

What tools or machinery do you have right now? Can you find a local cabinet maker or joinery company to supply some better timber? Some timber merchants will machine timber to the finished sizes you want then you can just cut to length and join it however you like.

davidpidge

Looks lovely that.

davidpidge

Search for one on ebay then put on the 'completed listing' filter. It'll show you any sold prices.

davidpidge

Which cutter are you using?

davidpidge

It's unlikely the top and bottom face of the sleeper are parallel to each other so even if the saw was cutting square it still wouldn't line up.
You'd be better off using the saw for one side then finishing with a hand saw.
Or hire a bigger saw for a day!

davidpidge

Evenin' What are your recommendations for a compressor setup? I want a quiet one and there seems to be options for that. Already been told to get a screw type as they're quiter but I'd still consider a cheaper piston type if it's silenced. Any companies around the south west who can supply and servi...

davidpidge

In 15 years someone will find that post and the answer they've been looking for!

davidpidge

Where are you based?

davidpidge

I know this is an old post but I would also recommend an SCM saw (or their minimax range or casadei).
All my machinery is SCM, some new, some very old and it's all excellent value compared to stuff down this end of the market.

davidpidge

You're not far from vastern timber. They could make the slats in English oak for you or if you can find a local joiner thay might use vastern already

davidpidge

Try timbersource. They machine various timbers to order but not sure where they deliver to.

davidpidge

18mm moisture resistant mdf would probably be your best bet.

davidpidge

Mine has the 2 knife block. I assume the you can feed timber more quickly with more knives in a block? I can get a lovely finish on mine if I feed at the correct speed. I'm looking into adding the aigner extension tables to mine. The MB is quite a small machine with short tables. I don't think a mac...

davidpidge

I made mine out of mdf but you could ask sedgwick how much a proper one is from them.

davidpidge

The slab with bevelled sides is nice. You been selling them on the side?

davidpidge

I've had an old sedgwick MB for about 8 years and it's brilliant. The green ones are older. I think they changed to the blue/white around 2000. They haven't changed the design significantly over the years but try and get one with a dc brake fitted otherwise it takes ages for the block to stop. Peopl...

davidpidge

We get the majority of our work through instagram now. We're frome interiors. My personal account mr_pidgeon

davidpidge

Nicely done.

davidpidge

A mains sander will probably have more oomph but more important is the speed and orbit pattern. Some sanders have smaller pattern of say 2mm for fine work and some have a 5mm pattern for quicker, more aggressive sanding. Look at a good budget 150mm like the metabo sxe 450. Or for seriously quick rem...

davidpidge

Because what does that even mean?

davidpidge

Hi,
I'm going to start contacting dealers but wondered if anyone has a 950mm wide belt sander going? We also need a spindle with sliding table and power feed (power feed not so important as we can get one).
Cheers

davidpidge

Post a photo of it sanded. Could be ash or oak but it's been stained so who knows?

davidpidge

Try calling TWS machinery. They're an SCM/casadei dealer and may have an old manual. Worth a shot?

davidpidge

Is the lighter ply softer and lighter in weight than the birch?

davidpidge

Could start on the free version of sketchup and it'd be a good skill for him to have. Some router work would be ok wouldn't it? Get him set up and do some small round over or groove work. Using a table is pretty safe with feather boards and push sticks. Learning how spinny sharp things behave is imp...

davidpidge

Stick with blum movento. Best there is and smooth closing action.

davidpidge

Threaded bar, resin. Easiest, strongest option by far.

davidpidge

pm sent

davidpidge

Can you post a photo of the label with the T-nr number etc. I might be interested as I was about to buy one anyway.

davidpidge

Contact your closest cabinet maker/joiner and ask them to supply you some prepared timber to the sizes you need.
I'd be happy to supply someone if they gave me a cutting list. Might take a few weeks though!

davidpidge

Location and photos might help

davidpidge

Sds London

davidpidge

Middle cab pulls out on heavy duty castors for access to water tank and all the plumbing.

davidpidge

If you're cutting sheet material for cupboards then even a cheap track saw can be extremely accurate. You also need less space than a table saw to cut large pieces.
I lived without a table saw for years when I started out.

Search found 442 matches