Search found 181 matches

by Jonathan
Thu Aug 29, 2019 10:16 pm
Forum: Woodworking
Topic: Drawer runners
Replies: 7
Views: 1086

Re: Drawer runners

Same here in Spain, if your official paper work is not correct you can't get accounts.
I just bought a bunch of Grass runners from Wurth and yep an excellent price.
by Jonathan
Sun Jul 21, 2019 8:27 am
Forum: Woodworking
Topic: Rail and stile cutter question.
Replies: 5
Views: 847

Re: Rail and stile cutter question.

Ive had something simular to this set from cmt for 20 odd years....this looks better than mine as I only got 1 shaft and 4 heads. https://www.cmtorangetools.com/na-en/adjustable-tongue-groove-bit-sets-for-mission-style-cabinet-doors It can be configured for all size of panels as you stack multiple h...
by Jonathan
Mon Jul 15, 2019 7:31 pm
Forum: Woodworking
Topic: Attaching quartz top to kitchen island
Replies: 1
Views: 481

Re: Attaching quartz top to kitchen island

CT1 will hold it!
by Jonathan
Sun Jul 14, 2019 7:27 pm
Forum: Power Tools and Machinery
Topic: Closing down sale at Tools4Pro
Replies: 4
Views: 725

Re: Closing down sale at Tools4Pro

Rodger
Have you seen the rubi tile leveling system? Excellent when doing big slab work....last year I had my Italian mate put up some 2mx1m porcelanosa slabs, the levelling system makes it so easy.
by Jonathan
Sat Jul 13, 2019 6:48 pm
Forum: Power Tools and Machinery
Topic: Closing down sale at Tools4Pro
Replies: 4
Views: 725

Re: Closing down sale at Tools4Pro

Hi Rodger...just managed to sort my login hick up out. Looking at there wed site they are a Spanish company, don't know how uk prices compare to our local prices....guessing we could get Rubi gear a little cheaper, I try and avoid any tiling work, especially floor tiling as my knees no longer agree ...
by Jonathan
Tue Jun 18, 2019 2:41 pm
Forum: Woodworking
Topic: Door stay for top hung door on face frame cabinets
Replies: 2
Views: 746

Door stay for top hung door on face frame cabinets

Hi Guys, looking for recommendations for door stays on a top hung door for a face frame kitchen.
Ive been looking at these https://www.hafele.co.uk/en/product/lid ... c00010023/
what do others use.....a soft close would be nice
by Jonathan
Fri Jun 07, 2019 5:50 am
Forum: Power Tools and Machinery
Topic: Myford ML8 - adding a speed control switch
Replies: 3
Views: 722

Re: Myford ML8 - adding a speed control switch

Keith
The Guru of all Guru's for this type of electricky is Bob.....he does look in here sometimes.....if you need this done quickly he can be found on The woodheven 2 forum.

Jonathan
by Jonathan
Thu May 30, 2019 6:09 am
Forum: Woodworking
Topic: Not seen this before
Replies: 3
Views: 768

Re: Not seen this before

I used to work with a bunch of specialist artists....when they know someone is watching them they would change there technique to something that would never work in real life.....is this just that on YouTube....or am I missing something.
by Jonathan
Thu May 30, 2019 6:09 am
Forum: Woodworking
Topic: Not seen this before
Replies: 3
Views: 768

Re: Not seen this before

I used to work with a bunch of specialist artists....when they know someone is watching them they would change there technique to something that would never work in real life.....is this just that on YouTube....or am I missing something.
by Jonathan
Tue May 28, 2019 4:39 am
Forum: Woodworking
Topic: Handle/knob suppliers
Replies: 2
Views: 555

Handle/knob suppliers

Any recommended suppliers?......I'm in Spain and hafele Spain are not good.....I've used j d beardmore and armac Martin which are great until you need more choice.....who else is out there?
by Jonathan
Tue May 21, 2019 8:11 pm
Forum: Woodworking
Topic: Blum movento or Grass dynapro
Replies: 3
Views: 659

Re: Blum movento or Grass dynapro

Thanks for the heads up MJ80....I've decided to give grass a try....plus there availability here from wurth in Spain is good where is blum is a nightmare.
by Jonathan
Mon May 20, 2019 1:35 pm
Forum: Woodworking
Topic: Blum movento or Grass dynapro
Replies: 3
Views: 659

Blum movento or Grass dynapro

Anyone got any opinions.....I normally use blum...now wurth want to give me 60% off grass which makes them approximately half the price of blum......will saving a few € come back and bite me in the ass?
Jonathan
by Jonathan
Thu May 16, 2019 6:30 am
Forum: Woodworking
Topic: Guidance on pricing window repairs please
Replies: 5
Views: 899

Re: Guidance on pricing window repairs please

I would only do splicing on a historical / listed building.....my guess is if you did the job to help the client out you would get no thanks and the job would be a pain for both you and the client........sadly, looking at the photos I guess if you priced to replace the windows in timber the client w...
by Jonathan
Tue Apr 30, 2019 4:58 am
Forum: Power Tools and Machinery
Topic: Power feeder for spindle moulder options
Replies: 13
Views: 1873

Re: Power feeder for spindle moulder options

Gosh Rodger....look like your up early like me....
by Jonathan
Tue Apr 30, 2019 4:56 am
Forum: Power Tools and Machinery
Topic: Power feeder for spindle moulder options
Replies: 13
Views: 1873

Re: Power feeder for spindle moulder options

Peter, I use power feeder on my hammer A331. When I bought my Felder KF700 I got the Felder power feeder, 3 wheeler....it was too fast and small for what I wanted on the spindle moulder so upgraded to the comatic dc40. The Felder power feeder was collecting dust..so set it up on the A331 and it work...
by Jonathan
Sat Apr 27, 2019 10:26 pm
Forum: Power Tools and Machinery
Topic: Power feeder for spindle moulder options
Replies: 13
Views: 1873

Re: Power feeder for spindle moulder options

Peter....I believe they are....if you asked on the Felder group I'm sure get a definite answer.
by Jonathan
Thu Apr 25, 2019 6:05 am
Forum: Woodworking
Topic: shaker door supplier
Replies: 8
Views: 1153

Re: shaker door supplier

Thanks Steve,

I'm now intrigued, some photos from someone would be great!

At the moment I do mine with the a cope and stick cutter in the Felder router spindle....it does take some setting up, but is nice having the power feeder do all the hard work.

PS. How's the finger now?
by Jonathan
Tue Apr 23, 2019 9:49 pm
Forum: Woodworking
Topic: shaker door supplier
Replies: 8
Views: 1153

Re: shaker door supplier

James
I've got a bunch of shaker doors to make soon....I'm intrigued as to what the Bobby method is?
Jonathan
by Jonathan
Fri Apr 19, 2019 4:26 pm
Forum: Power Tools and Machinery
Topic: Power feeder for spindle moulder options
Replies: 13
Views: 1873

Re: Power feeder for spindle moulder options

Peter
Co matic also make a smaller 3 wheel version....DC 30....

They also do a smart stand for power feeders.....which allows you to raise and lower from the front of the machine....no more leaning over the spindle or walking around it seems a great idea.
http://www.co-matic.com/en/product/Acc-SS
by Jonathan
Wed Apr 10, 2019 6:34 am
Forum: Power Tools and Machinery
Topic: Power feeder for spindle moulder options
Replies: 13
Views: 1873

Re: Power feeder for spindle moulder options

Couple of year's ago I upgraded my Felder power feeder with a co matic dc40, a big 4 wheel feeder....240 volts and under 500w....just plug it in a 13 amp socket.

The Felder PF was not able to slow down enough where the co matic has a variable speed that slows down to snails pace......
by Jonathan
Mon Apr 08, 2019 2:44 pm
Forum: Power Tools and Machinery
Topic: Hammer C3-31 dished fence
Replies: 23
Views: 3321

Re: Hammer C3-31 dished fence

Rodgers
You could fine that the one wheel on the infeed is the problem......its a bit like putting pressure on the in feed whilst planning.
by Jonathan
Sun Apr 07, 2019 8:56 pm
Forum: Power Tools and Machinery
Topic: Hammer C3-31 dished fence
Replies: 23
Views: 3321

Re: Hammer C3-31 dished fence

Rodger......try moving the power feeder to the outfeed fence....
Or.....Another option is to fix a MDF sled up on the slider so its nearly touching the cutter....secure the timber...run it past the the cutter

Hope that makes sense....
by Jonathan
Fri Mar 22, 2019 7:15 am
Forum: Power Tools and Machinery
Topic: Can’t get my planer to cut straight.
Replies: 3
Views: 846

Re: Can’t get my planer to cut straight.

Many manufactures send machines out ready to plane a spring joint ....
Try setting in and outfeed level with each other, then check the tops for flatness .....if this shows a very slight concave you will get a spring joint
by Jonathan
Sun Jan 20, 2019 6:09 pm
Forum: Woodworking
Topic: Oak tops and Undermount sinks
Replies: 5
Views: 933

Re: Oak tops and Undermount sinks

I've done quite a few undermount sinks with timber drainers in my time, if it's for a client I don't recomend a timber drainer for obvious reasons, but some(the purists type) insist. All 3 homes that I've owned have had them. The first was a double drainer in reclaimed canadian maple, finished in ru...
by Jonathan
Mon Dec 31, 2018 10:51 am
Forum: Power Tools and Machinery
Topic: Hammer C3-31 dished fence
Replies: 23
Views: 3321

Re: Hammer C3-31 dished fence

Rodger
Yes 4"x1" is no problem...I can get up to 12" high
[20181227_100623]
I will attempt to post an image, let's see if it works.
Regarsds the sacrificial fence, here should be some images to show my set up
[20181227_095406]
[20181227_095457]
[20181227_095534]
by Jonathan
Tue Dec 18, 2018 9:54 am
Forum: Power Tools and Machinery
Topic: Hammer C3-31 dished fence
Replies: 23
Views: 3321

Re: Hammer C3-31 dished fence

Rodger I use my hammer a331 and power feeder to face side and edge and it works a treat, saves a bunch of time and makes it real easy on big long lengths, I give the fence a little extra support, prop a piece of wood between the back of the fence and something. Also made some in, outfeed tables like...
by Jonathan
Tue Aug 14, 2018 5:49 am
Forum: Woodworking
Topic: Raised fielded panels in ??
Replies: 3
Views: 994

Re: Raised fielded panels in ??

I do it regularly with MR MDF.
Naturally the first coat will raise the grain, cut it back with a foam pad paper, your golden.
by Jonathan
Mon Aug 06, 2018 9:04 pm
Forum: Power Tools and Machinery
Topic: Power feeder
Replies: 11
Views: 2088

Re: Power feeder

Rodger Not au fait with you tube so can't help you there, I'm old school, started with technology about 5 years ago. Ok let me try and explain it another way. The image of the feeder you posted.... Swing the horizontal arm 45° towards the garage door wall. Extend the horizontal arm fully or enought ...
by Jonathan
Sun Aug 05, 2018 8:04 pm
Forum: Power Tools and Machinery
Topic: Power feeder
Replies: 11
Views: 2088

Re: Power feeder

Rodger
No, not on you tube that I know of, just my own way of doing it and making life easy.
There is also a gas strut that you can fix to the swing over plate that makes it a one hand job. Bunch of guys on the felder owners group have done it....
by Jonathan
Sun Aug 05, 2018 4:22 pm
Forum: Power Tools and Machinery
Topic: Power feeder
Replies: 11
Views: 2088

Re: Power feeder

Rodger To swing the feeder on the tilt away bracket with ease.... set the feeder up perpendicular to the planner table's, horizontal arm would need to be fully extended to miss the planner, pull the slider out of the way, should now swing over with ease....naturally the lower you can get the feeder ...
by Jonathan
Thu Aug 02, 2018 1:17 pm
Forum: Power Tools and Machinery
Topic: Power feeder
Replies: 11
Views: 2088

Re: Power feeder

Rodger
My co-matic arm measures 760mm
Have a look at the machine here https://youtu.be/wVrfJQgryrQ
The way this one changes from horizontal to vertical is a great time saver, the only other feeder I found simular was a Martin power feeder which was about 2k

Jonathan
by Jonathan
Wed Aug 01, 2018 8:29 am
Forum: Finishing
Topic: White spots
Replies: 2
Views: 988

Re: White spots

Could be silica, I have it in some Iroko windows in my house seems to come and go.
I believe there is a product that deals with it, I've not used it.
Jonathan
by Jonathan
Mon Jul 30, 2018 10:57 pm
Forum: Power Tools and Machinery
Topic: Power feeder
Replies: 11
Views: 2088

Re: Power feeder

Rodger Have a look at scott and sargents they import the co-matic dc 40 which is 4 wheels, the way the dc 40 goes from vertical to horizontal is a big time saver over conventional feeders. Don't know about arm length, can measure it if you need....will add that the best improvement in my shop in the...
by Jonathan
Thu Jul 26, 2018 9:33 pm
Forum: Woodworking
Topic: Felder Summer promotions
Replies: 9
Views: 1960

Re: Felder Summer promotions

Mark....I'm up in the mountains 20 mins north of Marbella In the Seirra de las nieves, been there 15 years and feel very blessed to live in such a buetifull part of Europe, the weather is kind to us , so yes like it...
by Jonathan
Tue Jul 24, 2018 8:37 pm
Forum: Woodworking
Topic: Felder Summer promotions
Replies: 9
Views: 1960

Re: Felder Summer promotions

Ive got a felder f38 power feeder on my planner and a co_matic dc 40 on the spindle.
I'll score the co_matic at 9
The felder at 4.........
I think the co matics are also cheeper than the felder (Scott and sargents)...
I'd sell the felder, you fancy a trip to Spain ?

Jonathan
by Jonathan
Wed Jul 18, 2018 1:40 pm
Forum: Woodworking
Topic: Why do we make through tenons these days ?
Replies: 15
Views: 3276

Re: Why do we make through tenons these days ?

Rodger Do some tests and you will be amazed. I done a few using 14mm dowles, on a IV 68 tilt and turn window project. I didnt want the cost of tooling involved in comb joints so opted for 2 x 14mm dowels. The sample joints I made I could not break using my big demolition sledge hammer My only regret...
by Jonathan
Sat Jun 30, 2018 2:58 pm
Forum: Woodworking
Topic: Integrated fridge with in-frame door
Replies: 7
Views: 1583

Re: Integrated fridge with in-frame door

David I've done this on a few occasions. Make the cabinet and face frames as normal and fit door/doors to fridge on sliders. Make sure you allow for clearance of fridge door to face frame. The other way ive done it if the fridge doesn't have sliders, is make the face frame as part of the door. Eithe...
by Jonathan
Sun Jun 24, 2018 7:47 pm
Forum: Woodworking
Topic: 3 or 5mm stroke
Replies: 4
Views: 1465

3 or 5mm stroke

Guys I'm going to buy a festool ETS EC 150 I'm not sure weather I need a 3 or 5 mm stroke? I have the Rotex 150 but as I get older finding it heavy using it single handed. So the ETS fits the bill. Main use is finishing ready for the spray shop. All my spraying is sub'ed out so no fine sanding betwe...
by Jonathan
Sun Jun 24, 2018 7:30 pm
Forum: Woodworking
Topic: Hafele hinges
Replies: 2
Views: 977

Hafele hinges

Guys I've been using blum hinges for ever. Are Hafele cabinet hinges any good? Are they made by blum? What about Grass? I'm in a situation over in Spain where hafele need me to spend 150€ to get free shipping, or I pay 25€ carriage. Recently my orders have been just shy of the 150€ so I'm stocking u...