Felder BF6-31

Got something you want to offer to others , here's where to advertise it
Post Reply
Woodernhift
New Member
Posts: 2
Joined: Mon Nov 18, 2019 8:50 pm
Contact:

Felder BF6-31

Post by Woodernhift » Wed Nov 20, 2019 1:08 pm

Hi I am selling my Felder BF6-31.

The machine was built in 1999 and has a 315 mm dis. saw with sliding table, 30mm spindle moulder, and 310mm surface thicknesser. Both the saw and spindle tilt up to 45 degrees. Included in the price is a router spindle for the spindle moulder (see photo, currently installed) cast iron in/out feed additional table for saw/moulder table and the surface thicknesser. Also an additional support table for the sliding table. The spindle moulder cover has the additional fine adjustment attachment fitted. There is also a separate hood for feeding curved work when using cutters with guide bushes, both for router and spindle moulder setups.

There are digital (analog dials) dials on all handles (saw hight and and angle, spindle hight and angle and thicknesser hight). This is especially useful on the thicknesser where it is easy to reproduce thicknesses to 0.1 mm and better

There are wheels attached (removed for shipping) and the arm is included so you can move it around you workshop.

The machine has only had relatively light use.

I am asking £2850, buyer to arrange transportation. I have already contacted a local company who specialise in moving equipment like this (though usually bigger) and they can do the job if needed.

Any one interested should PM me and if you visit I can demonstrate the machine for you, I am located in midlands area.

I can only add 5 photos so I cannot show everything in this post.

Thanks
Paul Langham
Attachments
078AE5E5-4ABB-436F-B527-DA40AD3AEF96.jpeg
8515BA84-9F8B-4C6C-A1E1-6FC73C0D94E9.jpeg
6187084D-B4F9-407B-A51D-CD3C93B0817C.jpeg
A58C3EBF-7E56-4564-844C-DF2693D9F08C.jpeg
66E15FAF-7EB3-4513-BE34-11DF63E1CAF3.jpeg

Woodernhift
New Member
Posts: 2
Joined: Mon Nov 18, 2019 8:50 pm
Contact:

Re: Felder BF6-31

Post by Woodernhift » Fri Nov 29, 2019 11:32 am

No one interested?

Post Reply