Baltic Birch Supplier in North East

If you need something and you think others might be able to help, ask away.
New Member
Posts: 6
Joined: Tue Aug 18, 2015 9:06 pm

Baltic Birch Supplier in North East

Postby dfidler » Wed Mar 07, 2018 3:30 pm

Hi All,

Disclaimer: I'm new to woodworking, please be gentle. :)

I've made the odd item out of the cheap "external plywood" that you can buy from Maxwell's DIY and I'm astonished by how bad that ply is (impossible to route cleanly, voids every few inches, warps if you breathe on it the wrong way) and I'm looking for something better.

I keep hearing about "baltic birch" and how magical it is but I can't seem to find a local supplier that either knows what it is (which surprised me) or that can tell me if their stock is "baltic" (which, I understand, is significant because the baltic birch's manufacturing process is different from normal ply). A couple of places have told me they have BB/BB birch ply. Neither could tell me if it was baltic birch. One did call their supplier and were told that the birch would be sourced from either Russia, Canada or Finland. But that doesn't really answer my question either. Either way, no one seems to have the 5x5 sheets which I'm reading I should look out for.

Does anyone know where I can source some baltic birch in the North east (Newcastle/Durham area) and what I should expect to pay, per sheet, these days? Note: I've seen it online, delivered, for £130/sheet, which seems pretty high.

Or if baltic birch ply is too hard/expensive to get these days, can anyone recommend an alternative

Posts: 3344
Joined: Wed Oct 17, 2007 8:50 am
Location: Surrey / Hampshire

Re: Baltic Birch Supplier in North East

Postby promhandicam » Wed Mar 07, 2018 11:44 pm

I'm not an expert on ply, but Baltic ply would refer to birch ply coming from the baltic region which would include Finland. On the odd occasions I've wanted decent quality ply I get Latvian birch ply from my supplier Richard Russell Panels, but they are in the South East so not much help to you. You want to get, if you can, b/bb grade or s+/bb grade as one face at least should be free from plugs although if you are lucky the more common bb/bb grade can be acceptable.

Hope this helps.

New Member
Posts: 4
Joined: Mon Oct 08, 2012 12:50 am

Re: Baltic Birch Supplier in North East

Postby thedesignman » Wed Apr 04, 2018 8:12 pm

Perhaps a good place to start would be Arnold Laver. I buy from them by the pallet in standard 8 x 4 sheets.

Baltic birch plywood orginates in the Baltic states and right across Russia. Most of what I buy comes from northern Europe and Russia's Baltic region. Occasionally it's originating in the very far east of Russia near Alaska.

It's a superb material to work with especially if you have a CNC machine. Most sheets available are BB/BB as the previous person has said but do expect some plugs on the surface. They are usually very well plugged with only the occasional defect.

The material itself is very well bonded and what I call bomb-proof. It is very unusual to find a void. I have used a simple oil by Osmo just to bring out the natural colour of the wood without any sanding and it's surprising what a great finish can be had with just three coats. I have also tested small samples immersed in water for a couple of days and no sign of delamination whatsoever.

Price wise.......12mm is around £30/35 per sheet and 24mm £60 per sheet ........ all + vat. Those prices are for fairly large quantities.

Hope that helps.......

New Member
Posts: 5
Joined: Wed Jun 22, 2016 1:23 pm

Re: Baltic Birch Supplier in North East

Postby mezzoo » Sat May 26, 2018 11:52 am

Hi. The plywood you want is from Latvia (where I live) made by company "Latvijas Finieris". It's best quality plywood in world. It is called Baltic birch plywood and it's so good, because not only top and bottom sheets are from good quality, but every single sheet. If it would be required in bulk, I could import them in UK as my friend owns delivery company in Europe. But to sell only few sheets it would be expensive for you. I can get them in different sizes as well not full size sheets from factories that are making furniture from them and have them in different sizes in sock - friend works there.

Return to “Wanted”

Who is online

Users browsing this forum: No registered users and 1 guest