Wanted

If you need something and you think others might be able to help, ask away.
Post Reply
User avatar
Doug
Subscriber
Posts: 2516
Joined: Thu Nov 20, 2008 8:52 pm
Location: location location
Contact:

Wanted

Post by Doug » Sun Jan 13, 2013 9:46 pm

Has anyone got spare or can recommend a supplier of a 90 degree 150mm metal bend for my dust extractor. Happy to pay, just not something I`ve ever bought before so don`t really know where to start searching.

Also while I`m hear I`ve an idea for a couple of cabinets to house systainers in & I need 6 pairs of full extension drawer runners, where`s the cheapest place to get them, they don`t need to be all singing & all dancing runners.

woodpecker
Occasional Poster
Posts: 211
Joined: Wed Jan 07, 2009 4:35 pm
Location: North Staffordshire
Contact:

Re: Wanted

Post by woodpecker » Mon Jan 14, 2013 9:04 am


Mr Ed
Subscriber
Posts: 1575
Joined: Mon May 31, 2010 6:33 pm
Location: Derbyshire
Contact:

Re: Wanted

Post by Mr Ed » Mon Jan 14, 2013 9:49 am

http://www.axminster.co.uk/axminster-st ... prod21878/" onclick="window.open(this.href);return false;

I know woodpeckers link appears cheaper, but I think you want a smooth slow bend which is slightly cheaper at Axminster

jake
Subscriber
Posts: 2743
Joined: Thu Sep 27, 2007 10:23 pm
Contact:

Re: Wanted

Post by jake » Mon Jan 14, 2013 10:03 am

The bend will be smooth at that diameter, but the long bend is right - is Axminster's a long bend? It would be out of line with their pricing on other ducting (which is very pricey, having been looking at this lately).

Mr Ed
Subscriber
Posts: 1575
Joined: Mon May 31, 2010 6:33 pm
Location: Derbyshire
Contact:

Re: Wanted

Post by Mr Ed » Mon Jan 14, 2013 10:23 am

jake wrote:The bend will be smooth at that diameter, but the long bend is right - is Axminster's a long bend? It would be out of line with their pricing on other ducting (which is very pricey, having been looking at this lately).
It looked so in the picture, but hard to be sure as they use one picture for several diameters which must all be slightly different

mrgrimsdale
Incredibly Regular Poster
Posts: 6901
Joined: Sat Sep 29, 2007 7:02 pm

Re: Wanted

Post by mrgrimsdale » Mon Jan 14, 2013 10:28 am

Would a drain pipe bend do it?

Mr Ed
Subscriber
Posts: 1575
Joined: Mon May 31, 2010 6:33 pm
Location: Derbyshire
Contact:

Re: Wanted

Post by Mr Ed » Mon Jan 14, 2013 10:48 am

mrgrimsdale wrote:Would a drain pipe bend do it?
Wrong diameter

EDIT - actually it might it be OK, I'd forgotten we were talking 150mm here

promhandicam
Moderator
Posts: 3501
Joined: Wed Oct 17, 2007 8:50 am
Location: Surrey / Hampshire
Contact:

Re: Wanted

Post by promhandicam » Mon Jan 14, 2013 11:20 am

I've bought from this ebay seller with no problem - http://www.ebay.co.uk/itm/400382265414

User avatar
Doug
Subscriber
Posts: 2516
Joined: Thu Nov 20, 2008 8:52 pm
Location: location location
Contact:

Re: Wanted

Post by Doug » Mon Jan 14, 2013 12:44 pm

Thanks for the replies chaps.

Just to say I didn`t want plastic as I`ve metal blast gates & if not earthed through the machine you get a right good pisser of the gates when you open/shut them.
The E-bay seller looks to have just what I want, I`ll give him a try.

Does anyone have any experience of these runners?

http://www.ironmongerydirect.co.uk/Prod ... ion/392056" onclick="window.open(this.href);return false;

jake
Subscriber
Posts: 2743
Joined: Thu Sep 27, 2007 10:23 pm
Contact:

Re: Wanted

Post by jake » Mon Jan 14, 2013 1:10 pm

That ebay one is a short/tight bend and is pricey for that.

senior
Subscriber
Posts: 3305
Joined: Sat Oct 25, 2008 3:13 pm
Location: on the sofa
Contact:

Re: Wanted

Post by senior » Mon Jan 14, 2013 6:21 pm

I probably have one but it would be clipped. Could always cut the flange off.
Call me doug if it's of use.
Have a look at my facebook page and leave a comment or two.
Or browse my website Hand made kitchens Essex

promhandicam
Moderator
Posts: 3501
Joined: Wed Oct 17, 2007 8:50 am
Location: Surrey / Hampshire
Contact:

Re: Wanted

Post by promhandicam » Mon Jan 14, 2013 7:48 pm

For the slides, I've used these from Buller and they are fine.

Post Reply