Stainless flues etc

If you need some advice but it isn't woodworking related, post here.
mrgrimsdale
Incredibly Regular Poster
Posts: 6901
Joined: Sat Sep 29, 2007 7:02 pm

Stainless flues etc

Postby mrgrimsdale » Tue Nov 27, 2012 2:34 pm

Am looking at multi fuel stove plus SS flue to go direct through floor above, ceiling and roof. Seems to be a lot of different suppliers out there.
Any hints, problems, recommendations, suggestions?

User avatar
Doug
Subscriber
Posts: 2513
Joined: Thu Nov 20, 2008 8:52 pm
Location: location location
Contact:

Re: Stainless flues etc

Postby Doug » Tue Nov 27, 2012 2:55 pm

For flues you could try MMF, branch in Mansfield

http://www.fluepipes.com/branches/mansfield.html

modernist
Subscriber
Posts: 5085
Joined: Tue Oct 16, 2007 9:31 pm
Location: Crich, Matlock
Contact:

Re: Stainless flues etc

Postby modernist » Tue Nov 27, 2012 3:01 pm

I think this stuff is better than Selkirk, and they seem to be having a "sale"

http://www.fluesupplies.com/index.php?cPath=24
Cheers

Brian


Tune in, turn on with Scandi Modern, it's fab.

Visit my blog at http://modernistmullings.blogspot.co.uk

mrgrimsdale
Incredibly Regular Poster
Posts: 6901
Joined: Sat Sep 29, 2007 7:02 pm

Re: Stainless flues etc

Postby mrgrimsdale » Tue Nov 27, 2012 3:12 pm

Righto ta.
These are good for info; http://www.stovesonline.co.uk/wood_burn ... imney.html
How far above roof covering does the outlet have to go, say it's halfway up the pitch? Does it have to go up to ridge height frinstance?

modernist
Subscriber
Posts: 5085
Joined: Tue Oct 16, 2007 9:31 pm
Location: Crich, Matlock
Contact:

Re: Stainless flues etc

Postby modernist » Tue Nov 27, 2012 4:13 pm

mrgrimsdale wrote:Righto ta.
These are good for info; http://www.stovesonline.co.uk/wood_burn ... imney.html
How far above roof covering does the outlet have to go, say it's halfway up the pitch? Does it have to go up to ridge height frinstance?


600mm above the ridge or, if part way up the slope, a horizontal distance of either 3 or 3.5m to the nearest point (I can't remember which)
Cheers

Brian


Tune in, turn on with Scandi Modern, it's fab.

Visit my blog at http://modernistmullings.blogspot.co.uk


Return to “Non-woodworking related DIY”

Who is online

Users browsing this forum: No registered users and 1 guest