Seated grandstand design

From Sketchup to pencil and paper, discuss your design and development ideas here.
Post Reply
New Member
Posts: 1
Joined: Tue Oct 08, 2019 9:40 pm

Seated grandstand design

Post by RedcarBear » Tue Oct 08, 2019 10:26 pm

Hi all, first time on here.
I am struggling with the design of a three tier bench seat sports grandstand. The seat width will be 600mm deep and 450mm high. The seating "steps" are fine but at 450mm is far too high as access steps lining up at one end and so I tried halving that but at 225mm it is still too high for the regs. To add a third step making the access steps 150mm is ok but it juts out of line with the 500mm seat walkway creating a trip hazard.

If you can understand the above I would be grateful for a solution.

Posts: 951
Joined: Wed Nov 27, 2013 6:37 am

Re: Seated grandstand design

Post by Meccarroll » Sun Dec 01, 2019 10:22 am

Do a sketch of the problem and post it. You may get some help then.

Post Reply