Stair Design Software

From Sketchup to pencil and paper, discuss your design and development ideas here.
Meccarroll
Subscriber
Posts: 738
Joined: Wed Nov 27, 2013 6:37 am
Contact:

Stair Design Software

Postby Meccarroll » Sun Feb 10, 2019 9:06 am

Hi all, just wondered if anyone here uses software to design stairs that is reasonably priced or even free.

I have heard of "stair designer" but can't actually find any other software out there. I am sure there is loads but when I input a search I obtain stair manufacturers.

Mark

JonR
Occasional Poster
Posts: 354
Joined: Sun Mar 02, 2014 8:36 am
Location: Somewhere too near Dartford
Contact:

Re: Stair Design Software

Postby JonR » Sun Feb 10, 2019 10:14 pm

https://www.staircon.com

You seen that one, doubts its cheap but please let me know as i do stairs quite often but just do rough design sketches fir clients.

http://www.ddxgroup.com/en/software/powerstairs

https://www.cadwork.com/cwen/Solutions/Staircase_design

thatsnotafestool
Subscriber
Posts: 4881
Joined: Thu Sep 27, 2007 5:27 pm
Location: Oop North where it rains
Contact:

Re: Stair Design Software

Postby thatsnotafestool » Mon Feb 11, 2019 7:36 am

Any good as a starting point, Mark ?

staircase designer.png
The advantage of a bad memory is that one enjoys several times the same good things for the first time.
Friedrich Nietzsche

Meccarroll
Subscriber
Posts: 738
Joined: Wed Nov 27, 2013 6:37 am
Contact:

Re: Stair Design Software

Postby Meccarroll » Mon Feb 11, 2019 6:31 pm

Thank you for the replies chaps, I will look at them all. I am a bit of a dabbler where joinery is concerned, as most of the time I'm on site but I am fascinated by stairs for some reason and the software fascinates me too!

Many thanks.


Return to “Design/Development”

Who is online

Users browsing this forum: No registered users and 1 guest