SCREWING TGV ONTO THE LEDGE AND BRACE

General wood working tips, tricks and ideas. Anything that doesn't belong elsewhere can be discussed here.
johnfarris
New Member
Posts: 12
Joined: Tue May 15, 2018 8:49 pm
Contact:

SCREWING TGV ONTO THE LEDGE AND BRACE

Postby johnfarris » Tue May 15, 2018 8:53 pm

When putting TGV onto a frame ledge and brace gate does it get screwed on to the ledge and brace as well as nailing?

Any help greatly apreciated

John

Meccarroll
Subscriber
Posts: 675
Joined: Wed Nov 27, 2013 6:37 am
Contact:

Re: SCREWING TGV ONTO THE LEDGE AND BRACE

Postby Meccarroll » Tue May 29, 2018 6:00 pm

Some people use screws and some nails. It is a matter of preference really as both ways work. It is not necessary to use both.

johnfarris
New Member
Posts: 12
Joined: Tue May 15, 2018 8:49 pm
Contact:

Re: SCREWING TGV ONTO THE LEDGE AND BRACE

Postby johnfarris » Sun Jun 10, 2018 11:56 am

Meccarroll wrote:Some people use screws and some nails. It is a matter of preference really as both ways work. It is not necessary to use both.


Thanks


Return to “Woodworking”

Who is online

Users browsing this forum: No registered users and 5 guests