Blum movento or Grass dynapro

General wood working tips, tricks and ideas. Anything that doesn't belong elsewhere can be discussed here.
Post Reply
Jonathan
Occasional Poster
Posts: 181
Joined: Thu Feb 19, 2015 7:51 pm
Location: Andacucia Spain
Contact:

Blum movento or Grass dynapro

Post by Jonathan » Mon May 20, 2019 1:35 pm

Anyone got any opinions.....I normally use blum...now wurth want to give me 60% off grass which makes them approximately half the price of blum......will saving a few € come back and bite me in the ass?
Jonathan

MJ80
Subscriber
Posts: 369
Joined: Wed Oct 31, 2012 8:15 am
Contact:

Re: Blum movento or Grass dynapro

Post by MJ80 » Mon May 20, 2019 6:43 pm

I always used the dynapro runners for timber drawer boxes. If I remember right they do two sorts, one has an extra 3d adjuster for tilt of the drawer front. The adjustability on them is really good. Never had any problems with them. Would recommended them.

Jonathan
Occasional Poster
Posts: 181
Joined: Thu Feb 19, 2015 7:51 pm
Location: Andacucia Spain
Contact:

Re: Blum movento or Grass dynapro

Post by Jonathan » Tue May 21, 2019 8:11 pm

Thanks for the heads up MJ80....I've decided to give grass a try....plus there availability here from wurth in Spain is good where is blum is a nightmare.

davidpidge
Occasional Poster
Posts: 383
Joined: Mon Jun 25, 2012 9:29 am
Contact:

Re: Blum movento or Grass dynapro

Post by davidpidge » Tue May 21, 2019 9:26 pm

Blum no question but if grass are more easily available and cheaper hard to argue.
I had a few of the newer grass 4d runners fail. Suppliers sent replacements but that was a couple half days lost going back to swap over.

Post Reply