Dust Extract adapter

If its got a cable, this is the place to talk about it.
Post Reply
New Member
Posts: 28
Joined: Mon Sep 09, 2013 9:58 pm

Dust Extract adapter

Post by sargan » Sat Mar 02, 2019 6:00 pm

Need help with a dust extract adapter.

I have a workshop dust extractor - via a cyclonic separator ... which has a flexible 50mm pipe .. and fitted onto the end a rubber adapter than allows it to fit neatly onto a 40 mm male spigot.
That means I can happily use it with several of my power tools directly or using ... using the DeWalt 60-40mm adapter that came with my bench saw.

However one item has an extract connection that I have so far not found adapter for.
This is a Record BS250 bandsaw .... it has a male spigot with an outside diameter of 60mm .... and I am having problems finding a 60 to 40 adapter.
Does anybody know of one ? .....

(Needs 60mm diam ID at one end and 40mm diam OD at other)

I could buy a piece of nylon rod and turn one down ... but be expensive

Posts: 1195
Joined: Tue Oct 23, 2007 12:27 pm
Location: Romsey, Hampshire UK

Re: Dust Extract adapter

Post by 9fingers » Sun Mar 03, 2019 9:15 am

Easily made from offcuts of upvc pipe and solvent cement plus hacksaw.
Information on induction motors and inverters here
https://drive.google.com/file/d/0B_GZrX ... sp=sharing" onclick="window.open(this.href);return false;


Post Reply