Holdroyd Grinder Help

If its got a cable, this is the place to talk about it.
Post Reply
Deema
New Member
Posts: 4
Joined: Sat May 02, 2020 6:13 pm
Contact:

Holdroyd Grinder Help

Post by Deema » Sat May 02, 2020 6:20 pm

I’ve new to this forum, not knowing it existed.....lead a sheltered life evidently! I’m really pleased to have been pointed to this forum.
I’ve been participating on the ‘other’ woodworking forum where Myfordman suggested someone, possibly Jason Fisher, on here may be able to help me.

I’ve recently bought a Holroyd grinder, lovely bit of old iron thatneeds some TLC. It has two wheels that are slow turning, and two that are fast turning. The two wheels just visible are slow turning the one on the left is unbelievable fine, almost an oil stone. On the other side there is a fast grinding wheel, a cone wheel with a leather strop encircling it.

Anyway in the next few weeks it’s having a full tear down and I was wondering if anyone had a copy of the manual, preferably with a schematic?
831F20CB-5FE0-495D-9C8E-D209C1C94A5F.jpeg
831F20CB-5FE0-495D-9C8E-D209C1C94A5F.jpeg (30.92 KiB) Viewed 297 times

jfc
Administrator
Posts: 10762
Joined: Thu Sep 27, 2007 3:39 pm
Location: London
Contact:

Re: Holdroyd Grinder Help

Post by jfc » Sun May 03, 2020 4:52 pm

Hi Mate . I dont have a manual for that machine but scott and sargeant may have one .

Deema
New Member
Posts: 4
Joined: Sat May 02, 2020 6:13 pm
Contact:

Re: Holdroyd Grinder Help

Post by Deema » Sun May 03, 2020 10:47 pm

Thanks JC.

Post Reply