Mitre Saw Blade Tearing Up Ply

If its got a cable, this is the place to talk about it.
Post Reply
New Member
Posts: 7
Joined: Wed Jun 24, 2020 11:17 am

Mitre Saw Blade Tearing Up Ply

Post by mark.c » Wed Jun 24, 2020 11:23 am

Hi guys,

I am cutting a lot of Hardwood ply at the moment on my mitre saw and im keeping the good face down, i have a 48t blade which i have read in a few places should be ok. However i am still getting tearing in the ply, and quite badly on both faces.

Is it that the quality of the ply is just not very good (Wickes) or that the blade i am using just isnt very good. The blade is the Einhell blade that came stock with my mitre saw. I have also noticed that it tears out quite badly when i do a 45deg mitre cut on soft wood.

Any help would be really appreciated.

Post Reply