Hi guys,
I am cutting a lot of Hardwood ply at the moment on my mitre saw and im keeping the good face down, i have a 48t blade which i have read in a few places should be ok. However i am still getting tearing in the ply, and quite badly on both faces.
Is it that the quality of the ply is just not very good (Wickes) or that the blade i am using just isnt very good. The blade is the Einhell blade that came stock with my mitre saw. I have also noticed that it tears out quite badly when i do a 45deg mitre cut on soft wood.
Any help would be really appreciated.