Page 1 of 1

Router bit help

Posted: Mon Apr 05, 2021 8:41 am
by Tomweston
I have a hardwood internal house door which has a rebate around each panel. I thought a cove bit would route the rebate to remove the old varnish but the rebate does not have a true radius as per the attached sketch, can anybody please advise on the router bit type to use?
Thanks, Tom

Re: Router bit help

Posted: Tue Apr 06, 2021 4:42 pm
by promhandicam
Welcome. If you just want to remove the varnish from the moulding then make a curved scraper to the correct profile - an old saw blade is ideal material to use.