Adjustable shelf system

Everything you need to know about finishing.
ruffdog64
New Member
Posts: 6
Joined: Fri Feb 14, 2014 7:21 pm
Contact:

Adjustable shelf system

Postby ruffdog64 » Wed Feb 07, 2018 2:56 pm

What does everyone use for adjustable shelving in units?

Jonathan
Occasional Poster
Posts: 141
Joined: Thu Feb 19, 2015 7:51 pm
Location: Andacucia Spain
Contact:

Re: Adjustable shelf system

Postby Jonathan » Thu Feb 08, 2018 7:15 pm

I use 3mm shelf supports from Hafele, and tonk type system from ironmungery direct.

Jonathan

Oakfield
Subscriber
Posts: 97
Joined: Fri Jan 21, 2011 5:17 pm
Contact:

Re: Adjustable shelf system

Postby Oakfield » Thu Feb 08, 2018 9:07 pm

I used to use the metal sleeves with metal shelf pin from LDLOnline. But have just moved to 5mm hafele shelf supports.

promhandicam
Moderator
Posts: 3342
Joined: Wed Oct 17, 2007 8:50 am
Location: Surrey / Hampshire
Contact:

Re: Adjustable shelf system

Postby promhandicam » Mon Feb 12, 2018 8:37 am

I've got a veritas shelf jig which is great for the 5mm shelf supports but I don't think it has a bush for a 3mm hole which is what I prefer using. I need to find someone with a lathe who can turn one up for me.

Tomyjoiner
Subscriber
Posts: 413
Joined: Mon Jan 02, 2012 5:51 pm
Location: cumbria
Contact:

Re: Adjustable shelf system

Postby Tomyjoiner » Mon Feb 12, 2018 10:16 pm

As above Tonk strips routed in or 3mm metal with clear plastic shelf supports from Haffele

davidpidge
Occasional Poster
Posts: 349
Joined: Mon Jun 25, 2012 9:29 am
Contact:

Re: Adjustable shelf system

Postby davidpidge » Tue Feb 13, 2018 9:50 pm

I use the 7.5mm sleeves with spade supports or flush bookcase strips.


Return to “Finishing”

Who is online

Users browsing this forum: No registered users and 2 guests