Chuck

If the work spins rather than the tool, this is the place for you.
Post Reply
ian 50
New Member
Posts: 1
Joined: Thu Aug 24, 2023 3:51 pm
Contact:
Contact ian 50

Chuck

Post by ian 50 »

I have been given a chuck but unfortunately it does not fit my lathe which is a Thyme Cub is there an adapter I can get so I can use the new chuck .

Thanks
Ian
Attachments
20230824_112205 lathe.jpg
20230824_112009 chuck.jpg
Top
Post Reply

Return to “Turning”