How to improvise when needing large sash clamps

General wood working tips, tricks and ideas. Anything that doesn't belong elsewhere can be discussed here.
Post Reply
DaveG
New Member
Posts: 6
Joined: Tue Jan 26, 2021 8:10 am
Location: Western Isles
Contact:

How to improvise when needing large sash clamps

Post by DaveG » Tue Feb 09, 2021 10:41 am

Recently I had to make some very large door did not have any clamps big enough. So I used 45 x 95mm timbers on bench fitted wooden block to one end then used old fashion floor board clamps to clamp frames, worked well.

Post Reply