Homemade router table

General wood working tips, tricks and ideas. Anything that doesn't belong elsewhere can be discussed here.
Post Reply
Gladewood
New Member
Posts: 3
Joined: Mon Feb 15, 2021 10:16 pm
Contact:

Homemade router table

Post by Gladewood » Wed Feb 17, 2021 10:37 pm

Was hoping to convert a circular saw and router into an undermounted table saw/ router table to be used at home. Both are 110 volt which will be used with transformer.
Looking for some sort of inexpensive nvr emergency stop start switch that i can mount to bench. Seems to be easy to pick up a cheap 230volt one with integrated plug. There is a trend 110v version which is very expensive in comparison.
Any other ideas would be appreciated.

Post Reply