Router cove bit for panelled door

If its got a cable, this is the place to talk about it.
Post Reply
Tomweston
New Member
Posts: 2
Joined: Sun Apr 04, 2021 5:06 pm
Contact:

Router cove bit for panelled door

Post by Tomweston » Sun Apr 04, 2021 5:15 pm

I have several varnished hardwood internal doors from the 1980s, each has 6 panels. I am trying to refurbish one which has a curved rebate around each panel, I thought a cove router bit would be ideal to run around the rebate to remove the varnish. I have measured the rebate cut out and found that the top portion cut away is 9/32” whilst the depth cut away is 5/32” which means not a true radius cut? Anybody got any ideas about the type of bit I require, preferably one with a bearing on it to run along the bottom edge of the rebate.

Tom

Post Reply